Power Switch
============

Step 1: Add the Switch
----------------------

Parts Needed: 
^^^^^^^^^^^^^^

- REV-41-1303 – Bracket, Motion (4)

- REV-41-1361 – Nut, Locking, M3 (8)

- REV-41-1359 – Screw, Hex Cap, M3, 8mm (8)

.. figure:: images/BasicB041.png
   :align: center
   :width: 2.31558in
   
   *Figure 45- Unconnected view*

.. figure:: images/BasicB042.png
   :align: center
   :width: 6.35021in

   *Figure 46- Connected view*

Step 2: Connect the Switch to the Control Hub
---------------------------------------------

.. figure:: images/BasicB043.png
   :align: center
   :width: 4.8075in
   
   *Figure 47- Unconnected view*

.. figure:: images/BasicB044.png
   :align: center
   :width: 5.32639in

   *Figure 48- Connected view*